Window installations are an exciting and necessary addition to your home. The quality of your windows makes a big difference in your daily life. Not only are they your ‘window to the world,’ but they also provide necessary protection from the elements.
Every homeowner should know how to identify when their window installations are faulty, starting to wear, or need to be replaced. You may have faulty window installations due to a negligent contractor or aging materials. Whatever the case may be, we want to help you spot the signs of poor window installations fast, so you can remedy the problem ASAP.
In this article, you will learn:
- Signs that your window installation may be faulty
- Surprising indicators that your window installation is not high-quality
- How to fix a poor window installation
7 Signs of Faulty Window Installations
Below you will find the top 7 signs you need to keep in mind for identifying when a new window installation may be needed.
1 – Issues Opening/Closing Your Window
You may notice this issue right away, or it may worsen over time. If you installed your windows during Winter when you’re not opening or closing them as much, this problem could go unnoticed for months. You may find that your windows are difficult to open once summer hits, or they are stuck entirely. This issue can typically be fixed by replacing damaged or faulty mechanical parts. Rusty hinges and chipped frames are common signs that indicate your windows are probably not functioning properly.
2 – Excessive Fog
While condensation is normal, too much accumulation is a red flag. It is likely that your window installation was poorly done or has structural inconsistencies if you find that your home is susceptible to moisture.
If you notice excessive condensation on your windows, give one of our experienced window installers a call. We’ll evaluate where condensation is coming from and offer a solution to the problem. Give us a call at 541-926-4597 to get started.
3 – Poor Caulking
Caulking is an important step in the window installation process. As a powerful sealant, caulking prevents air, water, and bugs from entering your home. If caulking is poorly done, you may notice more drafts, water accumulation, or uninvited pests near or around your windows. Poor caulking often results from an inexperienced application or rushed work.
4 – Stains & Discoloration
Have you noticed that your windows are stained or discolored? This is typically a problem that presents itself over time. You may notice a yellow tint to the discoloration. This problem usually requires a brand new window installation.
5 – Drafts or Leaks
Drafts are not only annoying, but they can also raise your monthly energy costs. One of the clearest signs of a window installation problem is a stubborn draft. Additionally, drafts often indicate that leaks may be present, too. If you notice wet stains around your window base, carpet, or baseboards, there is a good chance your window is to blame.
Drafts or leaks may worsen over time due to temperature fluctuations. When the temperature shifts, poorly designed or installed windows can crack, warp, and ultimately lead to drafts or water spots.
6 – Uneven Windows
Uneven windows are a common problem for older homes. Regardless of your home’s age, your windows should fit perfectly in place and in the structure of the frame. Each window needs to be carefully measured, sealed, and insulated to not shift in place. Professional window installation is crucial, as even a small mishap or oversight can lead to annoying drafts or accumulating water inside your home.
7 – Rising Energy Costs
Rising energy costs are one of the least obvious signs that your windows are not installed properly. Poorly insulated windows allow heat to escape your home, forcing your HVAC system to work harder to heat your home. You should always aim for the highest quality installs possible and work with a team that knows what they are doing. Otherwise, you may end up paying for a poor installation in the long run. Investing in the right team and the right materials from the start is always your best bet.
Professional Window Installation in Albany
If you recently had windows installed and experienced one or more of the symptoms described above, give our team a call. The good news about poor window installations is that they can be fixed.
At Top Form Contracting, we have been performing window installation in Albany, OR, for years. With decades of combined experience among our crew members, we’ve seen every mishap and poor quality window installation you can imagine. We have the right tools, team, and solutions to address your faulty installation and give you the proper window replacements you deserve.
Get in touch with our team over on our Contact Page or reach out to us via phone at (541) 926-4597
Window Installation in Albany, OR
Top Form Contracting has been performing window installation in Albany, OR and elsewhere in the Pacific Northwest for years. With decades of combined experience under our belts, we know how to install, seal, and perfect your installation every time.
We believe in high-quality workmanship, superior customer service, and long-lasting installations for every client. If you have had a poor experience with a previous window installation, or you are ready to start your installation process today, we are ready to help!
To learn more about our services, visit our Window Installation Page.
Visit these helpful links below to learn about our other home contracting services:
For more great resources on home improvement projects, visit our Blog Page.
Get in touch with our team to request window installation in Albany today: (541) 926-4597